Front camber help
 

Hi

I have a r50 race car. I am looking at getting a negative camber on the passenger front wheel for oval racing. What we normally do is cut the bottom arm and add a 1” bit of box to kick the camber out. The problem is that by looking at doing this, we won’t have much to play with the driveshaft. As I think it will just pop out as soon as we go around the corner.

is there another driveshaft that would fit as it will need to be at least 1 and a half inches longer so the shaft won’t pop out.

does anyone know how we can get around this so we can run a camber or have any ideas to help.

cheers