Mini Cooper Forums - Mini Cooper Enthusiast Forums - R50 Getrag 6 speed conversion parts

I have the parts need for an R50 6 speed getrag conversion

I did this conversion, and then lost the engine a couple months later to bad compression.

I spent around $3000 on this all when I bought it.

The flywheel kit, axles, slave cylinder, and shift cables have less than 5000 miles on them. The gearbox had about 100K miles if I remember right. It had no problems in my car when installed.

includes:

Getrag 6 speed manual transmission (non-LSD, It is the BKE version with the desirable gear ratios)
Driveshaftshop Level 0 axles with OEM bearing mount from R53
OEM Starter
OEM clutch slave cylinder & pipe
Valeo single mass flywheel conversion Kit (flywheel, clutch, and pressure plate)
shift box +cables with short shift kit installed
mounts brackets, bolts, etc

prefer local pickup in Indianapolis
freight could be arranged
https://cimg6.ibsrv.net/gimg/minicoo...e9d034fc66.jpg
https://cimg7.ibsrv.net/gimg/minicoo...3f96e6dc7b.jpg
https://cimg8.ibsrv.net/gimg/minicoo...3d01e9c838.jpg
https://cimg9.ibsrv.net/gimg/minicoo...8ca032f20a.jpg
https://cimg0.ibsrv.net/gimg/minicoo...bf8d41b2e3.jpg
https://cimg1.ibsrv.net/gimg/minicoo...1baee7c4d9.jpg
https://cimg2.ibsrv.net/gimg/minicoo...a7149cc965.jpg
https://cimg3.ibsrv.net/gimg/minicoo...7d2a43a39e.jpg
https://cimg4.ibsrv.net/gimg/minicoo...2a3563420b.jpg
https://cimg5.ibsrv.net/gimg/minicoo...3887094ea6.jpg