General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

04 cooper s, r53 oil light at idle

Thread Tools
 
Search this Thread
 
  #1  
Old 01-24-2010 | 07:44 PM
MORGAN's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2010
Posts: 3
Default 04 cooper s, r53 oil light at idle

Just purchased an 04 Cooper S, and the oil light comes on at idle. I removed the oil filter and there in the bottom of the housing were 2 springs lying loose. As well in the bottom of the housing there was a plastic spring holder still inserted in the base. the spring holder seems to be broken.

Questions:

1. Can this part be purchase separately? and where??( MINI will only sell the complete oil filter housing)

2. I'm guessing that this is the oil bypass relief, is that correct?

3. Are there any other solutions???

4. Does anyone have a picture of what it should look like??

Thanks
 
  #2  
Old 01-24-2010 | 08:01 PM
bad venge's Avatar
Super Moderator
Joined: Feb 2008
Posts: 2,306
Default

http://www.realoem.com/bmw/showparts...95&hg=11&fg=30

shows parts/breakdown/part numbers
 
  #3  
Old 01-24-2010 | 08:31 PM
MORGAN's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2010
Posts: 3
Default

Thanks for the reply, I do have that picture I was looking for the spring assembly inside the housing?
 
  #4  
Old 02-07-2010 | 12:34 PM
chris jones's Avatar
Junior Member
Joined: Feb 2010
Posts: 1
Default Spring and valve in oil folter housing

I think I have the same issue. I am in the middle of an oil change and found a spring and plastic valve in the filter housing. I am not sure if it supposed to attach at the bottom of the housing or if it goes inside the filter somehow. The pictures showing the housing and filter show a spring inside the filter, but mine did not have that. This spring seems too small and is over a plastic valve which is also spring loaded. Any help is greatly appreciated!
 
  #5  
Old 02-07-2010 | 01:55 PM
bad venge's Avatar
Super Moderator
Joined: Feb 2008
Posts: 2,306
Default

Pictures of said parts ???
There's a small 1/4" plastic valce on the bottom 5 oclock of the filter housing
 
  #6  
Old 02-07-2010 | 07:54 PM
MORGAN's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2010
Posts: 3
Default

Chris it was the bypass or relief valve that had come apart but also I was missing the plastic cap, I suspect with the last person in there (last owner/mechanic?). I wasn't able to buy the part separately but only the oil filter housing assembly. You may be able to reassemble what you have if the plastic cap is complete.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jc8825
2002-2006 Mini Cooper S (R53)
2
12-11-2015 05:20 PM
Roberto Carlos Cortedano Jr
2002-2006 Mini Cooper S (R53)
0
02-18-2014 10:19 PM
Done Swimmin
General Tech
5
01-26-2012 06:18 AM
andshesaidtwice
General Tech
1
03-19-2010 12:42 PM
1fstmini
General Tech
0
05-27-2005 12:46 AM




All times are GMT -5. The time now is 03:25 AM.