General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

04 cooper s, r53 oil light at idle

Old Jan 24, 2010 | 06:44 PM
  #1  
MORGAN's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2010
Posts: 3
Default 04 cooper s, r53 oil light at idle

Just purchased an 04 Cooper S, and the oil light comes on at idle. I removed the oil filter and there in the bottom of the housing were 2 springs lying loose. As well in the bottom of the housing there was a plastic spring holder still inserted in the base. the spring holder seems to be broken.

Questions:

1. Can this part be purchase separately? and where??( MINI will only sell the complete oil filter housing)

2. I'm guessing that this is the oil bypass relief, is that correct?

3. Are there any other solutions???

4. Does anyone have a picture of what it should look like??

Thanks
 
Old Jan 24, 2010 | 07:01 PM
  #2  
bad venge's Avatar
Super Moderator
Joined: Feb 2008
Posts: 2,306
Default

http://www.realoem.com/bmw/showparts...95&hg=11&fg=30

shows parts/breakdown/part numbers
 
Old Jan 24, 2010 | 07:31 PM
  #3  
MORGAN's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2010
Posts: 3
Default

Thanks for the reply, I do have that picture I was looking for the spring assembly inside the housing?
 
Old Feb 7, 2010 | 11:34 AM
  #4  
chris jones's Avatar
Junior Member
Joined: Feb 2010
Posts: 1
Default Spring and valve in oil folter housing

I think I have the same issue. I am in the middle of an oil change and found a spring and plastic valve in the filter housing. I am not sure if it supposed to attach at the bottom of the housing or if it goes inside the filter somehow. The pictures showing the housing and filter show a spring inside the filter, but mine did not have that. This spring seems too small and is over a plastic valve which is also spring loaded. Any help is greatly appreciated!
 
Old Feb 7, 2010 | 12:55 PM
  #5  
bad venge's Avatar
Super Moderator
Joined: Feb 2008
Posts: 2,306
Default

Pictures of said parts ???
There's a small 1/4" plastic valce on the bottom 5 oclock of the filter housing
 
Old Feb 7, 2010 | 06:54 PM
  #6  
MORGAN's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2010
Posts: 3
Default

Chris it was the bypass or relief valve that had come apart but also I was missing the plastic cap, I suspect with the last person in there (last owner/mechanic?). I wasn't able to buy the part separately but only the oil filter housing assembly. You may be able to reassemble what you have if the plastic cap is complete.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jc8825
2002-2006 Mini Cooper S (R53)
2
Dec 11, 2015 04:20 PM
Roberto Carlos Cortedano Jr
2002-2006 Mini Cooper S (R53)
0
Feb 18, 2014 09:19 PM
Done Swimmin
General Tech
5
Jan 26, 2012 05:18 AM
andshesaidtwice
General Tech
1
Mar 19, 2010 11:42 AM
1fstmini
General Tech
0
May 26, 2005 11:46 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:30 PM.